Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

ca 53 - bbs rolling out barrel after fired bb

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ca 53 - bbs rolling out barrel after fired bb

    just bought a new gun from the states, i've been messing around with it and on chronoing, ive found that it fires fine in semi, at a good fps, but after the bb has been fired, one or two bbs roll out the barrel...

    anyone know why? fires fine in full auto...
    Khathar hunnu bhanda marnu ramrod It is better to die, than live a coward



    http://thechive.files.wordpress.com/...if?w=275&h=157

  • #2
    Re: ca 53 - bbs rolling out barrel after fired bb

    No hop nub or worn hop rubber. Worst case incorrect nozzle ie too long or poorly seated hop unit for some reason.

    Comment


    • #3
      Re: ca 53 - bbs rolling out barrel after fired bb

      its a brand new gun....
      Khathar hunnu bhanda marnu ramrod It is better to die, than live a coward



      http://thechive.files.wordpress.com/...if?w=275&h=157

      Comment


      • #4
        Re: ca 53 - bbs rolling out barrel after fired bb

        And? changes nothing... except now you can send it back under warrenty.

        Comment


        • #5
          Re: ca 53 - bbs rolling out barrel after fired bb

          i cant, i've ground bits lol... besides its from the states, so a bit hard to return... ok, will try messing round with the hop a bit, or try an mp5 lower...
          Khathar hunnu bhanda marnu ramrod It is better to die, than live a coward



          http://thechive.files.wordpress.com/...if?w=275&h=157

          Comment


          • #6
            This is going to sound crazy. But try it.

            Take the base plate off your magazine, slide in some cardboard that you've cut to fit it, two thin strips should do. Jam it back on and try.

            Might not do anything but I own one and it's the solution to more problems than you'd think.

            Comment

            About the Author

            Collapse

            bob86 Find out more about bob86
            Working...
            X