Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Hope this is the right one.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hope this is the right one.

    I recently installed a madbull tightbore barrel into my G&G raider but now the bb's are veering off to the left even when there is no wind present. what have i done wrong installing the barrel? and how can i correct it please?

  • #2
    Re: Hope this is the right one.

    either the hop nub is not in right or the barrel is twisted.

    Comment


    • #3
      Re: Hope this is the right one.

      thanks.

      Comment


      • #4
        Re: Hope this is the right one.

        with some hop up units and barrel combos its possible to twist the barrel a small amount even though the clip holding the barrel is in place. theres lots of ways to solve this, one being packing out the front of the barrel where it meets the hop just in front of the clip so its a tight fit, the other is just to hold the the barrel and hop up to the light and make sure its central before you put it in the gun.

        Comment


        • #5
          Re: Hope this is the right one.

          thanks for the input.

          Comment


          • #6
            Re: Hope this is the right one.

            hi
            could also be that the hole for the hop up rubber is not large enough and is catching on the edge so it will pul the bb's to one side.
            it doesnt hurt to file the hole a little larger so there is plenty of room.

            i would look down the brrel while turning the hop up and see hows its working
            Dont Eat What You Cant Fry


            Comment

            About the Author

            Collapse

            Michael Wren Find out more about Michael Wren
            Working...
            X