Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

CA B&T mp5K disassembly

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CA B&T mp5K disassembly

    Alrite, so my gears striped the other day *sigh*, well at least it was with only 5 minutes left of the day. Anyway so I started to disassemble it. been following this video, no probs until approx 5.38. The cabled shown in the back of the gearbox is in the front of mine, and what more, wont nudge, not from the pressure I am willing to pull with before confirming that they are really suppose to come lose anyway.

    Anyone that owns a CA and could help me out a bit

    my toygun is better than your toygun

    wtb: kwa atp auto, kwa atp ptp

  • #2
    Re: CA B&T mp5K disassembly

    bump.
    my toygun is better than your toygun

    wtb: kwa atp auto, kwa atp ptp

    Comment


    • #3
      Re: CA B&T mp5K disassembly

      Took some pictures, not sure if they can be of any help?

      my toygun is better than your toygun

      wtb: kwa atp auto, kwa atp ptp

      Comment


      • #4
        Not sure from the pics, as I can't see them in high res on my phone, but try taking the rear sight off. This keeps the two parts of the outer body clamped together which stops the gearbox coming out.

        Comment


        • #5
          Re: CA B&T mp5K disassembly

          gearbox is loose, the only thing holding it down is the cable.. quite sure its soldered btw.. thinking of maybe removing the housing on the battery connector at the other end of it?
          my toygun is better than your toygun

          wtb: kwa atp auto, kwa atp ptp

          Comment

          About the Author

          Collapse

          two_zero Find out more about two_zero
          Working...
          X