Broken Metal ICS M4 Lower Receiver

[chriscoo14]

I have currently boken the back bit of my M4 where the stock connects to the lower receiver. It is a clean snap no pieces are missing or chipped off. I am trying to avoid purshasing a new lower receiver, so if anyone has any ideas that would be great!!! Pictures below
photo 1.jpg
photo 2.jpg
photo 3.jpg
Thanks,
Chris

[mr lean 81]

Re: Broken Metal ICS M4 Lower Receiver

Dude any repair other than welding that would be a waste of time. And that is prob more expensive than a new lower / body. Ics do a nylon fibre body thats hard as nails. looks good and not too costly.

[Opossum]

Re: Broken Metal ICS M4 Lower Receiver

You could always stick a metal threaded spring guide in the upper gearbox then use a longer stock screw to attach the stock to the gearbox like a normal AEG. You'd have to undo the stock to split the gearbox but it'd keep it solid

[FlangTal1ty]

Re: Broken Metal ICS M4 Lower Receiver

Run it without the stock altogether. I removed the stock on my ICS M4 and replaced it with a butt plate that has a QD Sling swivel, makes it a lot easier to use in CQB.

[dave38x]

Re: Broken Metal ICS M4 Lower Receiver

New lower body im afraid mate!

[chriscoo14]

Re: Broken Metal ICS M4 Lower Receiver

Thank you everyone I have what I needed thanks the all the help! Please close thread MOD's