G3 help please

[carlx2]

hi ya i need some advice , i have a t3 ras (G3) and i want to fit a silencer to it, however the little screw that you take off is on the barrel so how do i fit a silencer or is there a way to take the flash hider off or can i fit a silencer of the flash hider ?

[eatthis]

Re: G3 help please

whtat make is it?
i own a jg g3 and you have to screw the flash hider off the end of the barrel mine was very tight

[carlx2]

Re: G3 help please

yeah it is a jg (T3 RAS) i hav just managed to get the flash hider off now i got to fig out what type of silencer will fit lol

[seansamurai1]

Re: G3 help please

I'll take a leap of faith here and say it will be a standard 14mm counter clockwise.
Laymans its opposite thread, instead of 'lefty loosey, righty tighty'. It's 'righty loosey, lefty tighty'.

[eatthis]

Re: G3 help please

I'll take a leap of faith here and say it will be a standard 14mm counter clockwise.
Laymans its opposite thread, instead of 'lefty loosey, righty tighty'. It's 'righty loosey, lefty tighty'.

thats what mine is basically almost every silencer will fit

[carlx2]

Re: G3 help please

yeah thats the same g3 i have just with ought scope and bipod lol i have ordered som stuff from wgc
to put in it lol
Guader High Speed Revolution Long Type Motor
LONEX Cylinder for
LONEX Aluminum Cylinder Head
LONEX Air Seal Nozzle
Element M95 ST Spring ( Oil Temper Wire )
Element M105 ST Spring ( Oil Temper Wire )
Element Extra Fit 170% Spring for AEG
Element Silent Piston Head
G&P Polyamide Low Resistance Selector Plate
LONEX Enhanced AEG Piston ( 10 Steel Teeth )
UFC 6mm Stainless Steel Ball Bearing

so i am hoping with at least one of the springs will give me 350 fps
im still learning about springs

[carlx2]

Re: G3 help please

do you find the heavy R.I.S bends the plastic frame ?

[eatthis]

Re: G3 help please

do you find the heavy R.I.S bends the plastic frame ?

No the whole gun is.very light stupidly light compared to am m14 ebr lol

[carlx2]

Re: G3 help please

yeah im finding that the front is starting to bend down which is lowering the angle of the shots