Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

NiMh battery help needed.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    NiMh battery help needed.

    I have two 2200maH 8.4v batteries. One was dead, the other I discharged.

    From fully discharged, a charge for either battery should have taken roughly 3.8hrs at 1A. Instead it took about an hour, according to my ProPeak.

    Half the cells were warm and half were cold when it finished - is this an indication of shagged batteries?

    How can I pull them back from the brink or do I need to replace them? Can they be reconditioned?

    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: NiMh battery help needed.

    discharge them give them a fast charge test voltage with multi meter discarge and chage normay see if tht works
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: NiMh battery help needed.

      I tried a discharge then connected it to my Accucel-6. Whilst charging, it read as 10.4v... I's confused!
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      Panoptes Gunnoisseur [n] pron: ['gun-uh-sur', -soor'] [Purveyor of fine taste in firearms]. Find out more about Panoptes
      Working...
      X