MAG H&K M4 midcap problem

[LtPurcy]

Hi guys recently got 5 of these and im having problems with them

One mags feeder has ventured into the depths of the mag so ill need to disassemble to get that

But the main thing is the mags wont feed, they go in they are quite tight and then it will fire one round then the rest dont feed they just sit there
also lost one of the bottom circular tabs from one of the mags somehow O_o????

gun is JG m733

Cheers

Also
Hi-caps feed flawlessly

[Abbadon101]

Re: MAG H&K M4 midcap problem

I have 16 of there and a few had problems with filling to full capacity but never like this.

There is a pannel on the bottom that twists and comes off, then take out the spring an spray a little silicon spray into the cannel, reassemble and see how they are then. if they still stick dissasemble and put a couple of small blobs of silicon grease on the runner (or whatever its called).

Hopefully that should sort it.

[LtPurcy]

Re: MAG H&K M4 midcap problem

Cheers mate

To be honest im more happy running hi caps, when they did work for a short while very ...meh whatever