Replacing iCS M4a1 Body

[laladijaan]

hi all,

wondered if there are any stadard replacement upper and lower receviers that will fit an iCS M4a1 (split gearbox version).

i have tried googling it, and find loads of references to RAS upgrades, but nothing on changing the body for a shiny VLTOR or Magpul etc. am i out of luck? :eek:

cheers,

Lal

[wires]

Re: Replacing iCS M4a1 Body

due to the gearbox design your stuck with the ics bodys

[Bleedout]

Re: Replacing iCS M4a1 Body

i believ you out of luck mate as ICS are a diff size to normal aeg gearbox's.
also normall M4 aegs split differantly to ICS m4s.

[wires]

Re: Replacing iCS M4a1 Body

same size but the gearbox is split in to 2 halves so it has to pivot on the front tmh pin, and the forward assist releases the spring tension, no other metal bodies do this

[laladijaan]

Re: Replacing iCS M4a1 Body

thanks for the quick responses guys, appreciate getting the bad news quickly. Mods, please close.