Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Bent spring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bent spring

    Took me spring out of the aeg, it was very compressed, flew miles and is now bent.

    I'm guessing jut is unusable and wojt playing anymore.

    any advice?
    sigpic

    Originally posted by Savaged Wolf


    Snowdrop - hes quiet but always there ! like a jedi

  • #2
    Re: Bent spring

    had it happen a few times, sometimes they become weak at the bend and break(bent beyond the elastic limit), spring's are cheep just get a new one to be sure.

    Comment


    • #3
      Re: Bent spring

      If you want to use it you could try heating the point that is bent and bending back into shape. Should work. May just be the spring has been well used. Depends how much it is bent. Get a pic up. Personally id get a new one


      Linky here>> http://airsofttutorials.com

      Comment


      • #4
        Re: Bent spring

        I'm sure doing this is a rite of passage for gearbox maintenance lol

        Certainly worth just replacing to be honest - it will snap at some point and springs are cheaper than gears and pistons to replace!

        heating will stop it snapping if you try and bend it back, but will affect the tempering of the spring, resulting in a soft or hard spot that will just snap.

        Comment


        • #5
          Once its bent, its bent. Springs are all of a fiver so no issue
          -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
          -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

          Comment

          About the Author

          Collapse

          Snowdrop Find out more about Snowdrop
          Working...
          X