Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Which v3 tappet for ~30rps

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Which v3 tappet for ~30rps

    quick one here lads, which tappet plate is the best for a V3 circa 30rps?
    managed to break mine outside the gearbox... (taken out during shimming)
    -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
    -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Which v3 tappet for ~30rps

    I'd go for a lonex, can't go wrong with a lonex part.
    Shadow Stalkers Airsoft Team
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Which v3 tappet for ~30rps

      Lonex, Modify/Guarder are all good for upwards of 60rps. Avoid KA or the brittle Polycarbs like Angel, d-boys, Ares, VFC etc..
      dsgdreamteam
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Cheers lads, id thought lonex cheers.
        -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
        -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        jonny lovegrove Marshal @ ZED Adventures: The Mall - RIP 2018 Find out more about jonny lovegrove
        Working...
        X