M14

[Sniper12]

Hi,

Basically I have taken the inner barrel out of the hop unit and don't know where the green bit of rubber goes and also a very small little rubber peice, which is around 5mm big, I think it's called a spacer . Could anybody help me because I don't know.


Thanks

[Chowder Head]

Re: M14

Sniper12, is it the bits in the picture below you are on about?

[Sniper12]

Re: M14

Yes thats them especially the small bit

[Chowder Head]

Re: M14

That wee black bit is called the bucking - thats the bit that applies pressure onto the BB.

The large piece of rubber goes onto the barrel, there should be a raised line on the inside of this and there should be a groove in your barrel. The raised line should sit in the groove of the barrel thats pretty much universal but unless anyone else with more experaince interveines I can't help anymore until I know what manufacturer your M14 is?

[dope_on_a_rope]

Re: M14

It's not called the bucking. Nub or spacer, not bucking. http://www.zeroin.co.uk/showthread.php?t=11157

[Chowder Head]

Re: M14

I stand corrected then - I've been calling it the bucking for years :S