TM MP7 Fill Valve Advice

[aaron-hill09]

Evening all,

After spending a short while cleaning and re-lubing my TM MP7 and mags, I was tightening the fill valve back up on the mag and it just continued to turn. I shortly realised that the head of the valve had snapped off and was just turning.

Therefore, The rest of the valve is still stuck in the thread whilst the head of it is sitting here staring at me.

So, I'm going to get a small drill bit and drill the old valve out. But, I'm trying to find a new decent quality fill valve that will work with the MP7. I'm wondering, do WE Valves work with these? I like most of WE's valves as they're silent fill as opposed to the other TM Valves.

So, anyone know if this would work?

Thanks,
Aaron

[aaron-hill09]

Re: TM MP7 Fill Valve Advice

Anyone?

[aaron-hill09]

Re: TM MP7 Fill Valve Advice

Can anyone please PM me to tell me where I can get hold of some fill valves for the TM MP7 GBB? Struggling like mad to find any!

[Mickydoos]

Re: TM MP7 Fill Valve Advice

Probably should be in the Gas gun section, might be why you're not getting many responses?