Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Shs motor pinion

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Shs motor pinion

    Just disassembled my gun to see for wearing and slight shim adjustment, and as I pulled the motor out the pinion was still in the gearbox 😳
    The gears were perfectly fine, but now I'm confused on what I should do as I can just slip it on and of the motor shaft.
    It's got a screw on the side pinion but I have no hex key small enough to fit it.

    Should I glue it with loctite ?


    Sent from my iPhone using Tapatalk
    I AM A NOOB ON A MISSION!!!


    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Shs motor pinion

    No, get an allen key to fit it, they're only cheap say, on auction.

    SAS
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Shs motor pinion

      Do you know what size ?


      Sent from my iPhone using Tapatalk
      I AM A NOOB ON A MISSION!!!


      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: Shs motor pinion

        I'd say most likely a 1.27mm, maybe a 1.5mm or 0.89mm - but you could get all three sizes for a few quid anyway.
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        gezer love airsoft and getting to know everything about it as a sport and the great friends that we meet. Find out more about gezer
        Working...
        X