Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

G&G CM16 Raider

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    G&G CM16 Raider



    I am trying to remove the stock tube from the gun however I cannot seem to unclip the wires, has anyone had the same problem?

    Airz

    Sent from my Galaxy Nexus using Tapatalk
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: G&G CM16 Raider

    Do they not just pull apart like crimp connectors?
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: G&G CM16 Raider

      Just pull them apart where that thick bit is. Shouldn't take too much force and they should just slot back together when reassembling.
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: G&G CM16 Raider

        pull harder
        Khathar hunnu bhanda marnu ramrod It is better to die, than live a coward



        http://thechive.files.wordpress.com/...if?w=275&h=157
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: G&G CM16 Raider

          Cheers folks, it just needed a bit of extra elbow grease

          Sent from my Galaxy Nexus using Tapatalk
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          Previous template Next

          About the Author

          Collapse
          airz Find out more about airz
          Working...
          X