Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Marui quality control

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Marui quality control

    Hello,

    I'm replacing one set of Marui gears with another (they were worn) and I was wondering if it's ok to keep the stock shimming pattern from the original gears or whether will I need to re-shim.

    Thanks in advance lads
    Formerly 'Waltzinblack' but thought it was time to incorporate my Team callsign into my name
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Marui quality control

    I would re-shim just to be on the safe side.

    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Marui quality control

      Indeed, reshim. TM are very good quality control, but you never know if those gears have been made to exacting tolerances, had they been CNCd Id say you would get away with it, but they are molded normally.
      section 24 of the 1968 Act
      Supplying imitation firearms to minors
      1)It is an offence for a person under the age of eighteen to purchase an imitation firearm
      2)It is an offence to sell an imitation firearm to a person under the age of eighteen.
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      TS_Welshy Find out more about TS_Welshy
      Working...
      X