best motor for ics m4a1??

[Destroyer]

i have a maximum of 50/60 to spend on a new motor, as my pinion gear decided to start spinning on the shaft of my eg1000..... grr....... suggestions??

isit worth the strech for a systema one?

[The Keeper of Secrets]

Re: best motor for ics m4a1??

No, because you'll have to replace other things, or space and file down the 2nd tooth of the piston.

Best bet is a CA highspeed or G&P M120. But I don't know about compatability; ICS are picky.

[Destroyer]

Re: best motor for ics m4a1??

i dont want the systema turbo, was thinking of the magnum.

the eg1000 fits fine....

[The Keeper of Secrets]

Re: best motor for ics m4a1??

Magnum's are only reaslly needed for M120 springs or above. It's design will be wasted on an M100.

CA highspeeds and G&P M120s are great motors.

[Destroyer]

Re: best motor for ics m4a1??

ill look for the G&P one then..... thanks tkos.

[kraker]

Re: best motor for ics m4a1??

try the 5ku motor, i noticed big improvement over the eg700 wich i had before and decent pirce aswell!

[Destroyer]

Re: best motor for ics m4a1??

found, ca high torque. please close

[sheard]

Re: best motor for ics m4a1??

try the SYSTEMA Motor Turbo Long (High Speed) this should be ideal although expensive but you did ask for the best! although you may need the short or medium type so ask before buying.

there £65.20 from a certian site that might give covering fire as you fun in the open. (wich i know is slightly above your price range but wo cares that much about a fiver)

[The Keeper of Secrets]

Re: best motor for ics m4a1??

Yes, and as I've said, a systema highspeed motor in a stock ICS gearbox will result in a chain of shredded pistons, unless you upgrade parts AND space/file down the 2nd tooth of the piston. Even then they are tempramental.

[Destroyer]

Re: best motor for ics m4a1??

im not risking a turbo n my 300 quid m4 thanks