VFC Scar-L Selector problem

[shaun_ccxr]

HI
My VFC Scar has a selector problem where both sides are not synchronising, which says when i move from safe to semi on the left side the right side still stay in safe mode etc.

Moreover the feel of that selector is so lazy that i never get a positive click on it.
Is that a screw went loose or any problem with it?

thanks

[Caldymoose]

Re: VFC Scar-L Selector problem

There is a small hex screw on the underside of the actual fire selector, which could be loose. If you remove that screw the selector will come off (mind to not lose the small ball bearing!!) and there will be a metal block underneath with another screw on it. Make sure both are tight.

The VFC Scar ambi selector system is a pain, its a bugger to get correct once you've had it apart and you might not get that nice 'click' you desire.

[shaun_ccxr]

Re: VFC Scar-L Selector problem

So just tighter up the screw do u mean?
Do I need to take the gearbox out?

[Caldymoose]

Re: VFC Scar-L Selector problem

tighten up those screws first and see if that helps