Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Motor Problem!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Motor Problem!

    My first pull of the trigger doesn't fully cycle the weapon and nothing happens? The second pull and it will fire? What's going on here? All I've done is out a new motor in! It was shooting fine yesterday with the new motor

  • #2
    Re: Motor Problem!

    battery is too weak to turn over your new motor, it parts cycles it on the first pull and on the second pull it completes the cycle, what battery, motor, and connection are you using?
    VICTORIA CONCORDIA CRESCIT


    LOOKING FOR: S&W N-frame holster
    trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

    Comment


    • #3
      Re: Motor Problem!

      Lonex A2 High Torque and a 7.4 lipo? Standard Tamiya connections

      Comment


      • #4
        Re: Motor Problem!

        After the first pull though every other trigger pull will shoot?

        Comment


        • #5
          Re: Motor Problem!

          so only the first trigger pull,then afterwoods it works fine, what happens if you put it to safe and back to semi, are you having this problem in semi or FA?
          VICTORIA CONCORDIA CRESCIT


          LOOKING FOR: S&W N-frame holster
          trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

          Comment


          • #6
            Re: Motor Problem!

            If I put in back to safe then back so semi it's still fine. Full auto it's the same?

            Comment


            • #7
              Re: Motor Problem!

              Have you over-adjusted the motor engagement?

              Sent on Tapatalk, apologies for spelling!

              Comment


              • #8
                Re: Motor Problem!

                so can you make it not cycle properly?
                VICTORIA CONCORDIA CRESCIT


                LOOKING FOR: S&W N-frame holster
                trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

                Comment


                • #9
                  Re: Motor Problem!

                  I'm going to try disengage the motor as much as a I can then go from there adjusting it.

                  And it cycles fine after the first trigger pull.

                  Comment


                  • #10
                    Re: Motor Problem!

                    I would strip the gearbox, check your shims and grease for good measure. If you're happy with that, start checking motor engagement. Have you corrected the AoE?

                    Sent on Tapatalk, apologies for spelling!

                    Comment


                    • #11
                      Re: Motor Problem!

                      Haven't touched anything inside the gearbox

                      Comment


                      • #12
                        Re: Motor Problem!

                        Hi C-Dawg, are you doing a complete trigger pull each time? When you say the 'first trigger pull', do you mean the first after connecting the battery? Or the first pull after 5 mins?

                        Sent from my HTC One using Tapatalk
                        GizMo
                        sigpic

                        Comment


                        • #13
                          Re: Motor Problem!

                          Yeah I'm doing a complete pull.

                          Okay so when I plug the battery in te first trigger pull does not fully cycle. After that it is fine.

                          If I use the forward assist, the first trigger pull after I've used te forward assist also does not fully cycle

                          Comment


                          • #14
                            Re: Motor Problem!

                            May I ask what rifle this is? I thought that most forward assists were just for show?

                            Sent from my HTC One using Tapatalk
                            GizMo
                            sigpic

                            Comment


                            • #15
                              Re: Motor Problem!

                              G&G Gr15

                              Comment

                              About the Author

                              Collapse

                              C-Dawg Find out more about C-Dawg
                              Working...
                              X