G&G RK103 Disassembly Guide

[Liquid_snake]

Hi guys,
I need to change out the spring in my RK103 for a lower fps but Im stuck on the disaasembly method for this gun. I can't find any way to remove the gas block (witht the rear sights on top) to be removed from the lower receiver/ seperate the main body from the front end of the gun. Ive noticed there appears to be a pin holding the two together, but having battered it theres no movement at all and the manual supplied with the gun hints at a two piece affair, yet theres no wy of prising either off.

Does anyone have a guide to disassembly or indeed experience in doing this job? All help much appreciated and brownie points will be distributed accordingly

[slappy]

Re: G&G RK103 Disassembly Guide

This might help

http://www.guay2.com/web/manual/RK_Manual.pdf

[Liquid_snake]

Re: G&G RK103 Disassembly Guide

Cheers slappy, thats the manual supplied with the gun too but I noticed an extra part on the outer barrel just behind the lower handguard on PDF. Following on from that I just stuck an allen key in it and turned, surprisingly out pops a threaded nub! Spring now changed and (for now) functioning fine.

Thanks for the help, many brownie points to you

[slappy]

Re: G&G RK103 Disassembly Guide

No probs