ARES M4 cuts out after couple of trigger pulls

[PUNKDADDY78]

so i have an m4 gearbox with built in mosfet the same as this one in the link

http://guns-pictures.drippic.com/ares-amoeba-m4-ccp-efc-system-s-aeg-6mm-bb-schwarz/kotte-zeller.de*$WS*kotte-zeller-shop*websale8_shop-kotte-zeller-shop*produkte*medien*bilder*gross*45387_4.jpg/

for some reason recently it cuts out after a few trigger pulls and the whole gun dies

i remove the battery and then reconnect it and a couple more bursts and then nothing

ive taken it apart and can see no fault with the wiring so i wondered if anyone had any suggestions as to the cause

only work on this gun is replaced connector with deans recently...no other mods

thanks in advance

[sparrowhawk]

Re: ARES M4 cuts out after couple of trigger pulls

what battery are you using,and was it working fine before you carried out the connector mod

[PUNKDADDY78]

Re: ARES M4 cuts out after couple of trigger pulls

I use all sorts of lipos and it was fine before connector mod

paint brush with a trigger .... yes please

[dexadrine]

Re: ARES M4 cuts out after couple of trigger pulls

Sounds like the gun may have a self-resetting fuse that is being tripped. Either that or you have a short or a dodgy connection somewhere.