Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

VFC HK417 aeg.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    VFC HK417 aeg.

    How do you remove the trigger guard on a 417?
    One side is spring loaded, drops down no problem. The OTHER side however.
    Tried to drift it out with zero success. Worried i might snap the mounting tags off.
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: VFC HK417 aeg.

    Anyone??
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: VFC HK417 aeg.

      So no one has ever removed a trigger guard on a 417?
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: VFC HK417 aeg.

        Hello mate, the pin closest to the mag well is a spring loaded one as you know, the one closest to the pistol grip is usually a split pin and need to be "tapped" out using a rubber mallet and a drift punch. Its usually the same diameter either side and isn't tapered so can be encouraged from either side of the weapon. Your replacement trigger guard may, instead of a spring pin for the front, may have installed a small grub screw which is installed through the hole when the guard is in place
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        0880yorkie Likes big cars, faster bikes, guns, beer and the wind in my flowing locks. Lol. Find out more about 0880yorkie
        Working...
        X