Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

New piston required, any recommendations?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: New piston required, any recommendations?

    Risk it for a biscuit :p

    Sent from my thl 2015 using Tapatalk

    Comment


    • #32
      Re: New piston required, any recommendations?

      Using heavier BBs to "beat the chrono" is not acceptable in a game that is based on honesty; you really must chrono with 0.2g BBs.

      Comment


      • #33
        Re: New piston required, any recommendations?

        site tells suspected hot gun user to remove mag and clear gun

        site drops their own genuine bb down barrel and it rolls down stopping just in front of hop

        holding gun at slight incline the site chrono's gun with their own genuine 0.20 bb
        this is in front of hop so zero hop btw

        site limit is 350 but might allow a smidge over say 360 due to zero hop

        if gun chrono's at say 385 & above then owner is using heavier bb's to cheat chrono
        or mega over hop at site's chrono when tested earlier

        cheater is asked to leave and may shown what 330-350 really feels like by marshals and perhaps rest of the players

        best advice - don't do it, I may mess about now n then but safety I do take seriously

        Comment


        • #34
          Re: New piston required, any recommendations?

          Whack some known 0.2s into the top of the magazine feed, replace magazine, shoot gun. If it is over 350fps and you chrono'd with heavier BBs to try to beat the chrono, wave goodbye to everyone.

          Airsoft is based on honesty; if people cannot be honest about the energy that their guns are putting out, they should not be involved in airsoft.

          Comment


          • #35
            Re: New piston required, any recommendations?

            cheaters beware

            Comment

            About the Author

            Collapse

            Nickos225 Find out more about Nickos225
            Working...
            X