Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Motor for ICS M4...?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Motor for ICS M4...?

    I recently played at GZ for the first time in god knows how long, only to hear my M4 making the most pathetic noise!
    I was told by a few guys it needed a new motor but i dont know which one to go for? i've already looked on Z1, but any advice?

    Cheers

  • #2
    Re: Motor for ICS M4...?

    The ICS 3000 seems to be running pretty well in my MP5 although there seem to be mixed opinions of them.

    G&P 120 again is fairly well spoken of also, particularly for high ROF setups.

    Other options include the Marui EG1000 or the Systema motors.

    To be honest i'd say that any of the above are good motors but it very much depends on the application i.e. High Power or High ROF.

    And try to be careful of the systema motors, I'm sure i've read somewhere that they should really be installed in conjunction with a mosfet due to the high initial load that they demand causing arcing on the trigger contacts.

    Anyways happy hunting

    Regards

    Jay

    Comment


    • #3
      Re: Motor for ICS M4...?

      Marui EG1000. Awesome motors.


      Comment


      • #4
        Re: Motor for ICS M4...?

        Originally posted by The Keeper of Secrets View Post
        Marui EG1000. Awesome motors.
        +1 Great allrounder. I get about 20 rps on an 8.4v battery in my P90 with one and they can easily pull the tougher springs. Not the fastest but I'd say the most manageable.
        TK Airsoft- Take one "from" the team

        Army Armament L85A1
        Tokyo Marui P90
        HFC M9 Special Forces
        KSC Glock 18c

        Comment


        • #5
          Re: Motor for ICS M4...?

          id usually agree about the tm eg1000, but have recently been let down by one

          replaced it with a CA super high torque. its great


          this is also im my ics m4

          Comment


          • #6
            Re: Motor for ICS M4...?

            easily between SYSTEMA TURBO and MARUI EG1000
            both very nice, fast and in all my guns with them in reliable.

            hope it helps

            Comment


            • #7
              Re: Motor for ICS M4...?

              Eg1000, yes, Turbo no. Sorry mate but in a stock gun it'll rip up pistons. You'll need to modify you piston with a spacer to correct AOE, as wellm as filind down the second tooth, and make sure there is absolutely no mechanical resistance to get a highspeed running nicely.


              Comment


              • #8
                Re: Motor for ICS M4...?

                in stock yeah eg1000 . but for tuned . both . . .

                Comment

                About the Author

                Collapse

                JAY91UK Find out more about JAY91UK
                Working...
                X