TM M4A1 Internal Modifications

[sj_asc]

Re: TM M4A1 Internal Modifications

alright mate thanks for the good help and advice and if i need any help with a matter around the same as this is it ok if ask for your help ?

thanks again

No problem Im glad i could be of some help.

just to let you know mate ive been running my marui 552 on a 9.6v with metal bushings and an m100 for over 10000 rounds no problems whatsoever. Got a tb so fps is in the 340's and rof is about 20rps.

A decent 7.4v LiPO will usually deliver similar results to a good 9.6v NIMH Pack. So that sounds about right.

[richardy]

Re: TM M4A1 Internal Modifications

you should only need to remove half of the second tooth. Any more than that and the pistons is simply not returning fast enough. which is a separate issue. If you only do half of the second you can use the others around it to watch for signs of wear.

I still treat lipos just like ordinary batterys, i woudnt change a single thing on a stock tm for a 7.4v lipo.