Fitting an M4 stock to a CYMA CM048

[KBoy76]

Hoping someone can help.

I have an Asura Dynamics M4 stock convertor and M4 stock tube I am trying to fit to my AK which has a solid wooden stock.

Take off the wooden stock and I'm presented with a metal screw fixing point for the stock that looks like it's riveted into the body of the AK.

Does anyone know how I remove this easily?

I presume that needs taking off, to make space for the Asura stick convertor that will fit into the back of the body somehow.

Any advice would be greatly appreciated.

Cheers,
Dave

Sent from my SM-G920F using Tapatalk

[simon]

Re: Fitting an M4 stock to a CYMA CM048

Not sure you can change it on a fixed stock version. Mine has two metal fixing point, one bottom, one top that ate part of the receiver. Only way I could see to do it is to saw these off but then your buggered if it don't work.

Try you tubing for vids but I think it may be a case of a new lower receiver.

[KBoy76]

Re: Fitting an M4 stock to a CYMA CM048

cheers mate. thought that might be the answer....

Sent from my SM-G920F using Tapatalk