G36c clogs and x2 x3 feeds.... :S

[kbates]

hey guys, i have a JG G36c and on semi-auto it is perfect, yet on full auto it blitzes about 12 bb's then say it shoots 5 ( they wont come out, untill they all pop out at the same time) it also shoots 2 bb's at once and on occasion one bb will roll out the barrell or go hardly anywhere ( 10 feet?)

i have been told to get a TM hop unit put it to try and sort out that issue, any ideas?

thanks

-kev

[North West Outpost]

Re: G36c clogs and x2 x3 feeds.... :S

It could well be hop orientated. Not quite the same but I had a pistol that was excellent on single but would hardly fire anything on full auto. Fiddled with the hop and all worked pefectly.

Why have a pistol on full auto.....It was C02 blow back and sexy to watch on full auto.

[kbates]

Re: G36c clogs and x2 x3 feeds.... :S

yea i think i may get a new TM hop unit?

[airguns]

Re: G36c clogs and x2 x3 feeds.... :S

Mines does the same so any help would be good but my g36c is tm.

[Crysis]

Take to zero one and get them to fix

And after every game especially in a dusty field .

Make sure you take it all apart- and clean it

[Hopewell]

Re: G36c clogs and x2 x3 feeds.... :S

Firstly, I would start by taking the hop unit apart and giving it a good clean! Easy as pie to get the G36 apart, bit of google-fu and you will be away! Also, probably worth cleaning the hop rubbing in hot soapy water, then rinsing and leaving to dry. By doing this, you will see if the hop rubber is fixed, and in turn, you will get rid of any gunk that is laying about in there!

Secondly, have you replaced the hop rubber? Probably worth getting at least a Marui one, but I would recommend a Madbull rubber with a 'H' nub, will work wonders for you!

Lastly (?!), you sure its not the JG HiCap misfeeding? Got any other mags to try it out on?