Ascu gen4 Problems

[Cayuse]

Installed the ascu gen4.
Everything was fine for half a game day.

The issue is that when firing after a couple of shots on semi it goes full auto for two shots followed by a double beep. After reconnection of the battery it works again and then repeats the issue.

With no magazine in the gun it cycles perfect with no issues.

I refitted the anti reversal latch but no change

Any ideas?
Thanks

Sent from my SM-G930F using Tapatalk

[Clotfuhrer]

Re: Ascu gen4 Problems

I had an issue with the cutoff lever. Did something similar, turned out to be the cutoff lever needing shimmed so reduce the play.
Give that a go

[Cayuse]

Re: Ascu gen4 Problems

Mine was cut off lever not lifting enough so reinstalled the original after cutting off the little latch.

Sent from my SM-G930F using Tapatalk