M4 upgrades for a sniping roll

[SGTSNIPER]

my s-system full stock already has a madbull 6.3 tb what other upgrades could i use for a more sniper based roll. thanks mark

[Taylorb]

Re: M4 upgrades for a sniping roll

new hopup maybe. but if it's tm they are already very good, up the fps a bit from stock? maybe lock to single for site regulations.

[The Keeper of Secrets]

Re: M4 upgrades for a sniping roll

Up the FPS, put in stronger gears and a high torque motor to pull the stronger spring. That's if you're going above 350, in which case you'll have to make it single shot for most sites.

[dope_on_a_rope]

Re: M4 upgrades for a sniping roll

Hop up is a problem. Something people don't think about that much at 350fps. But TM M4 hop ups are not up to the job. I wouldn't trust them at low power levels to be honest. The ICS drum type is much better. There are other options too. If you're going to go for a 425+ setup, I'd suggest the prommy neo chamber or whatever it is they call it. To be honest, the TM m4 is not a good base for a semi auto sniper. Looking at the rest of your guns, and the amount of money and effort you'd have to put into an m4 to make it what i'd call decent... I'm not even gonna bother to start listing things.