Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

MP5 problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MP5 problem

    Just taken apart the gearbox on my mp5 and fixed a gear issue i had, now i seem to have encounted another problem, when i pull the trigger with either semi/full auto nothing happens, after me pulling the trigger a number of times the power then comes back.but only for a while.

    Also the selector witch seems to not be working as when semi is selected it will fire full auto.

    Cany anyone help?

    Toby

  • #2
    Re: MP5 problem

    maby it could be your selector plate, check if there is any movement in it and if it wobbles from side to side
    PM me if you're looking for S-ARMS M4 mags

    Comment


    • #3
      Re: MP5 problem

      sounds more like a problem with your switch (in the gearbox) and or tappet plate.
      KSC MP7A1 (Tw)
      mix'n'match M4
      Maruzen P99

      Comment


      • #4
        Re: MP5 problem

        that maybe the trigger contacts on both the selector plate and also the switch block in side the gear box

        the brass plates maybe dirty on both parts , and also the lack of power maybe due to the fact the contact plates are spread wide apart , if they are just move them in a little bit but GENTLY

        Comment

        About the Author

        Collapse

        tintin102 Find out more about tintin102
        Working...
        X