Army Armament R85A1

[Lambourne]

Will most upgrade parts from different makes like G&G be able to fit in the Army Armament R85A1, if so what would everyone advise on me upgrading first

[aribos]

Re: Army Armament R85A1

first off get a different hop rubber for it as the standard one is utter rubbish ,
then do the ptfe mod on the cylinder head and hop rubber to improve consistency

also buy a 10mm spacer for piston and remove the 18 tooth piston inside it the 10mm spacer allows you to use any v2 piston with it , finally replace the sector gear for a hardend steel variant

[Lambourne]

Re: Army Armament R85A1

ok thanks