Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

CA M15A4 dying...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CA M15A4 dying...

    I have an Classic Army M15A4 played yesterday and a couple of hours into play the battery just died. I have tried it with many other batterys, checked charge, etc. From a new battery it shoots about 200 shots and just dies, and the battery is dead. Any ideas?
    YouTube Channel - Airsoft Sniper videos
    http://www.youtube.com/user/coldy30

  • #2
    Re: CA M15A4 dying...

    Sounds like a wire issue to me... But could be more my m15 is always spliting the wires when ive put it back together... So it could be a short from the said wires but thats just my thoughts .

    Comment


    • #3
      Re: CA M15A4 dying...

      i would say try a new battery and what size battery's are you using.

      Comment


      • #4
        Re: CA M15A4 dying...

        If you have have tried a new battery many times mate

        Try a different motor as it will cause it to sound like it dying slowly as the bushes may be worn in the motor

        Comment


        • #5
          Re: CA M15A4 dying...

          I've tried it with 8.4 2200 and 9.6v 1500 as well as some of my mates others. All mine only about 3 months old, the batterys work fine in there guns. So I guess the question is where do I get the new motor from and which one is best?

          And thank you for the speedy replies! god you guys are fast...
          YouTube Channel - Airsoft Sniper videos
          http://www.youtube.com/user/coldy30

          Comment


          • #6
            Re: CA M15A4 dying...

            my ca motor died after a while its a common fault wit the m15 ive got an ics in now" high torque motor "

            Comment


            • #7
              Re: CA M15A4 dying...

              Would you recommend it as a replacement?

              I'm just stripping it, in case it is a wiring fault. I have found the big screw on the pistol grip is almost all the way out. Could this be part of the problem? As yet I have found nothing wrong with the wires.
              YouTube Channel - Airsoft Sniper videos
              http://www.youtube.com/user/coldy30

              Comment


              • #8
                Re: CA M15A4 dying...

                just tighten the screw back in mate ,

                and the screw wont stop the motor turning , will be a wiring fault or as been said try another motor before hacking at the wires

                Comment


                • #9
                  Re: CA M15A4 dying...

                  Its all fixed now. It was a wire.

                  Thanks for all the replies, it was good having so many replies so quickly.

                  Coldy
                  YouTube Channel - Airsoft Sniper videos
                  http://www.youtube.com/user/coldy30

                  Comment

                  About the Author

                  Collapse

                  Coldy Find out more about Coldy
                  Working...
                  X