Wobbly front end

[apalmer101]

My m4 CQB front end is wobbly as the sight post isnt secured properly, but both pins are fully secured
and help or ideas to stop the wobble?

[snuff]

Re: Wobbly front end

Are they solid pins or cellot(?) pins(hollow).

[apalmer101]

Re: Wobbly front end

Solid pins, but because the front sight post is wobbly
my RIS wobbls too

[guard-sniper87]

Re: Wobbly front end

have you installed the ris spacers mate

as they stop the wobble

[johnnyj]

Re: Wobbly front end

is the grub screw tight ? where your sling loop will be under there is a small grub screw and this will hold the sight

if the sight is solid then look at the handguard cap some use a fake gas tube but a lot use a bolt and small screw if there missing then the ris can move alot !

[apalmer101]

Re: Wobbly front end

My whole front sight post has a small amount of play, but the barrel doesnt move, and i wouldnt have a clue what a RIS spacer is :S

[guard-sniper87]

Re: Wobbly front end

what ris kit have you got on it , free float , or fixed

[apalmer101]

Re: Wobbly front end

Fixed

[guard-sniper87]

Re: Wobbly front end

hmmm , what make mate

[apalmer101]

Re: Wobbly front end

Jg :L

[guard-sniper87]

Re: Wobbly front end

it maybe the spiky delta ring is loose fitting on the delta ring itself allowing movement

[apalmer101]

Re: Wobbly front end

Well i just took the outer barrel off, cleaned anything i could find off, put it back together, still getting the same problem but delta ring is as snug as a bug, just the front sight post isnt clamped on properly or something, both the pins are fully in on both sides, brain is rather frazzled by it :/