M4 problem :(

[fatsam]

Hi, My JG M4 is havving MAYJOR issues with firing, it has gotten much much worse than before!
I fitted a TB barrel 1 week ago and now after 2 or 3 shots on semi, the mag whiirrs like its out of ammo (high cap) and then it shoots out like 20 bbs and they just roll out the barrel, it does this with BOTH my mags everytimne I wind it up, whats wrong???
Are my BB's to slippery?
Shall I wash them?
If so what shall I wash them in?

[The Keeper of Secrets]

Re: M4 problem

Chances are you have reassembled the hopup unit wrong. Take it apart again and use a guide on the internet to reassemble it correctly.

And please post in the right section in future. Moved to tech.

[snuff]

Re: M4 problem

NVM.........

[fatsam]

Re: M4 problem

No,. it has only started with this new TB barrel, I will re-build the hop up and see if that is the problem

[guard-sniper87]

Re: M4 problem

what new barrel is it ,

also as TKOS said , the hop rubber sounds like it gets stuck , stopping the bb's

[fatsam]

Re: M4 problem

yep well usualy the rubber comes off with the barrel, this time it is wedged in there and wont come out :S

[Bachelarius]

Re: M4 problem

Use a poky stick to get it out, for me the rubber NEVER comes off with the barrel, so don't think it's weird that it has not done so.

[fatsam]

Re: M4 problem

Well Ive just RE-done my hop up and it is the same!!!
GRRR

[fatsam]

Re: M4 problem

Itsa AMDBULL 6.03 TB barrel

[guard-sniper87]

Re: M4 problem

try a different hop rubber mate

also try a different brand of ammo , and a different mag

[North West Outpost]

Re: M4 problem

It does sound like the hop rubber, as that should grip the bb's and not let them through untill pushed by the air. But if several are slipping through the rubber is no seated properly..



And I just can't resist to tell you...

Just this once you do not need to wash your balls.....