Sopmod M4 Recoil stock conversion

[Trenchrunner]

Hi I have just picked up a TM recoil shocks and was wondering what sort of work is needed to convert the wiring to fit into other stocks. From what I have gathered the connection is split when the stock is removed so will need to be completely rewired from the gearbox as one complete wire.

If anyone has already had this done would like to hear some explanations to what they had done.

p.s I will be using a real Magpul CTR stock so I will need the cable to run all the way to the butt pad which will be routed out.

Cheers,
Bill

[druid799]

Balls to all that mate ! All you need to do is remove all the battery gubbins from the end of the stock tube so your left with just two wires sticking out of it them solder wire to them with your connector on the other end and that’s it done !