Motor for classic army m249 para

[Willlock]

Hi all i have a classic army M249 para lmg and motor has gone and need to replace it and i dont know what motor is best to replace it the gun runs a m105 spring thats all i have done. Thank tou for any advice given

[BoM]

Whats your budget? CA M249 requires a short type motor I believe. I would probably go with something that is torque speed balanced for a SAW like the Lonex A1. But if you don't want high speed you could go for the A2.
https://hwairsoft.com/airsoft-aeg-mo...-m120-ak47-v3/
https://hwairsoft.com/airsoft-aeg-mo...-m120-ak47-v3/

If you are on a slightly tighter budget perhaps go for an SHS high torque:
https://www.ebay.co.uk/itm/SHS-Toys-...YAAOSwEzxYRSUr

Even the ZCI high speed actually has a higher torque than most standard motors, so half decent blend:
https://www.ak2m4.co.uk/internal-par...gh-speed-short

[sj_asc]

I would suggest going for a high torque motor as they will draw less current/make less heat and be better suited for sustained fire.

[Willlock]

Thank you all im looking to get one of the above as soon as payday comes thank you for your help