Snapped Cylinder Head Nozzle

[jagillham]

After about 20 shots yesterday, I found my BB's going around 6ft

Opened up the gearbox to find the cylinder head nozzle had snapped clean off, and was now inside the air nozzle!

I've got a new cylinder head coming, but wondered if there might be a "cause" to this to look out for? Anybody had something similar happen to them before?

Just thought I'd check before putting another in there to break!

[richardy]

Re: Snapped Cylinder Head Nozzle

the standard ones do over time, as the nozzle part is not one peice to the rest of the unit.

Thats why a cylinder head upgrade is always a worthy purcashe as once the fixed nozzle on the original tm cylinder head starts spining its never quite as good fps as it can be.

If it was a full cnced one you managed to break, i bow to you sir... impressive ..

[jagillham]

Re: Snapped Cylinder Head Nozzle

Would have been a standard TM one in there!

No worries, so long as there is not an under laying issue there :D

[richardy]

Re: Snapped Cylinder Head Nozzle

its a first for it completely breaking... but yeah the insides get loose and start to turn after a while..