rof motors

[tsv2tuff]

hi guys looking for a good high speed motor and was hopeing you might have some suggestions.. i am trying to get a really good rof without a lipo so have installed some high speed gears and a reinforced piston i just need a fast (the fastest) motor any ideas?

[Montesa77]

Re: rof motors

Element on a budget or G&P M120. Don't forget a 9.6 or a 10.8 battery.

[jagillham]

Re: rof motors

What kind of speed you want? (bearing in mind, the faster you go the more needs to be done, and quicker it breaks!)

[North West Outpost]

Re: rof motors

The G and P M120 wont be as quick as the Element max speed. The M160 is quicker and I have read some suprisingly bad reports about the M170.

The fastest one I know of is the XYclone, from the Philippines, which is capable of speeds over 40 per sec at 400fps. Well in excess of what we can use over here, not sure what it will do with an M100 spring.

With the right battery choice the Element one should get well in excess of 40 per sec. But as Jag says unless you set your gear box up properly will not last for long.

Don't spend unnecessary money on Systema and be missguided.

[Evilllamas]

Re: rof motors

Systema Turbo

it might create a black hole though.

[North West Outpost]

Re: rof motors

Systema Turbo

it might create a black hole though.

Why would you want to spend so much money when the Element Max speed is a copy without shorting problem...Beats me.

[Montesa77]

Re: rof motors

Arn't the pinions on the turbos crap? Seen alot of reviews about them striping.

[North West Outpost]

Re: rof motors

Supposedly, but I couldn't tell you from experiance as I go as close to Systema motors as I do to dog poop on the pavement.....No I tell a lie, you do tend to stand in dog poop occasionally...

[tsv2tuff]

Re: rof motors

not looking for anything as crazy as 40rps would be happy with mid 20's.. on a 9.6 if possible.. currently geting 18rps stock on a 9.6

[North West Outpost]

Re: rof motors

That should be quite easy...(wonders how many times he has said that befor.)

What is your set up now?

[tsv2tuff]

Re: rof motors

gaurder piston and head installed rest of the gun is stock ics m4.. dont know whether to go with highspeed gears or just a highspeed motor with stock ics gears or both ??

[North West Outpost]

Re: rof motors

Either one or the other should put you over the 20 mark.

[tsv2tuff]

Re: rof motors

but which motor would put me furthest in to the 20s ?? if i keep the stock gears

[tsv2tuff]

Re: rof motors

or should i say how fast can i go with standard gears without loosing too much reliabilty 30-40 rps is nice but not much good if it breaks the gun after a few hundred rounds.

[richardy]

Re: rof motors

TM eg3000! horah :P