M4 not working

[Sherbs]

Hey all,

Dismantled my JG M4 for a spray up, all back together again and not cycling at all.

Now I thought I had around half a battery charged, but it might have emptied over 3 weeks.

So I am recharging my battery, but if that doesn't work whats likely to be the problem?

I did remove the motor, but to my knowledge it went back in fine. Unless a wire came loose.

Any help at all would be appreciated.

[humphriesryan]

Re: M4 not working

if it aint tht then a wire has come lose but if there is not and still not workin then check the wire jut in the gear box coz the motor may of got court on it and ripped it lol

[Sherbs]

Re: M4 not working

Mmm the red wire has snapped of from the spade. Oh well

[EBR-freak]

Re: M4 not working

just as a quick fix job, strip about half a centimeter of the wire, split the bare wire into 2. then feed one half through the hole in the motor contact and then twist them together. just as re-assurance to see if that was it. most likley was

[guard-sniper87]

Re: M4 not working

can get normal spade connections from the bay of e mate ,

or you can just solder the motor wire directly onto the terminal

[FunkycHUNKY]

Re: M4 not working

Or maplins Going there tommorow to get myself a soldering iron and some "female lucar" connectors

[humphriesryan]

Re: M4 not working

maplin is the best bet

[Sherbs]

Re: M4 not working

just as a quick fix job, strip about half a centimeter of the wire, split the bare wire into 2. then feed one half through the hole in the motor contact and then twist them together. just as re-assurance to see if that was it. most likley was

Yeah I have already tried that before I posted my 2nd reply so I know the motor is ok!

Motor spins, so it was just a broken spade. (female lucar! )