G&P Vltor Body - removing the front pin?

[InFlamesFan]

got a brand new VLTOR body in the post today, went to start putting together my custom M4, Finally, but the front pin is in rock solid! any ideas?

[johnnyj]

Re: G&P Vltor Body - removing the front pin?

They are tight on the newer bodys :P, I use a large pin punch and knocking stick to tap them some times just needs 1 good blow on the pin , try and have something supporting the body if you can

IF you dont have a pin punch ( cheap from diy shops ) you will need something with a Flat head to use as a makeshift punch , some small screw sets have an allen type end and use a larger driver or small hammer to tap it out but be warned if u use a screw driver it might slip and damage the bodys paint work

[InFlamesFan]

Re: G&P Vltor Body - removing the front pin?

cheers mate didnt want to do anythign that may damage it, but thats what ill do

[johnnyj]

Re: G&P Vltor Body - removing the front pin?

Np any problems let me know sure i can help , is it a g&p gb going in it ?

[InFlamesFan]

Re: G&P Vltor Body - removing the front pin?

yeah, the standalone 8mm one they do :D