Changing rear stock

[Jsmithy]

hey guys, i've always wondered this, is there a particularly easy way to change the way an M4 rearwired's stock from a full stock with a large tamiya to a Crane stock with mini tamiya?

Obviously changing the connectors, but as the full stocked M4s have a hole below the stock tube, i'm guessing replacing the body aswell plus getting a stock tube that is hollow (if it isn't already) is pretty much a must?

Just looking for some advice on it as i really dislike full stocks and if one of my AEGs is gona be rear-wired then i'm gona want to have a crane stock on it, not a full one.

Cheers for any advice!

[jagillham]

Re: Changing rear stock

Pretty much take off the solid stock, and replace with a stock tube and stock

Wiring is more or less the same, you could always cut it to size!

[Jsmithy]

Re: Changing rear stock

Figured as much, but what i've noticed is that there is a dirty great hole in the back end of the reciever from the fixed stock, or am i just going crazy?