Converting a M4 cqb to a L119a1?

[fergus37]

Hi,
I have a SRC M4 CQB and a SAS loadout but i was just wondering if there was anyway of converting my M4 to a l119a1 because this is more commanlly used by SAS. Does anyone know anything about doing this? and if its possible? if not can some tell me where i can get a l19a1?
Thanks greatfully,
Fergus Harris

[sebct]

Re: Converting a M4 cqb to a L119a1?

Only way is to custom build a L119A1. No-one makes one, "off the shelf".....yet.

To convert your M4 CQB you need the following parts:

Old-style M4 stock - Various Makes
M4 Buttpad - Guarder
Large Pistol Grip - Guarder/G&P
C8/L119A1 receiver. G&P/D-Boys
KAC RIS. (If you don't have them already) - G&P
C8/L119A1 Barrel set. - Perrmike custom/Dragon Red
C8/L119A1 Front-sight.

HTH,

Seb

EDIT: There are also other threads stating what parts are needed.

[Montesa77]

Re: Converting a M4 cqb to a L119a1?

If your gonna do it 100% correct I think it would be one of those cases were its better to sell you current gun and get a pre-built one off of here. Would probily be cheaper too.

[fergus37]

Re: Converting a M4 cqb to a L119a1?

I see what you mean there and thats proberlly what im going to have to do but L119a1 airsoft guns are pritty rare...

[Montesa77]

Re: Converting a M4 cqb to a L119a1?

From sebct's list it looks like you just need a GB, motor, barrel and hop up( and mabye some other parts) and your done. Sound likes it would be fun to build it from scratch.

[andysmith]

Re: Converting a M4 cqb to a L119a1?

Don;t forget that you need tons of sniper tape to wrap around magazines and all sorts of stuff to make it look ub3Rl3Et