Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Dboys PDW upgrades

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dboys PDW upgrades

    Well after weeks of thinking about what gun I have gone for a Dboys PDW.

    So my question is what should I look to replace?

    I will change the hop and rubber (what should i go for) as I have herd they are not so hot but is there anything else I should be looking at?

    Cheers all
    sigpic
    http://www.zeroin.co.uk/itrader.php?u=6155

  • #2
    Re: Dboys PDW upgrades

    mine was fine using good quality bb,s. (excell .25) the ics bb,s are pants and cause feed issues.
    you will have to downgrade fps as mine was 390fps out the box on a .20
    m14/l1a1/thompson/sten/sig552/kac pdw/svd/l85a2/mp40/m16vn/car15/type56/mac10/scorpion/m79/m1 carbine/m60vn/stoner63/vfc bar/xm177e2/grease gun/ar57/m1911/uzi/aksu/mp5 b&t/ppsh41/mpl/diy sog rpd/acm m500/galil/

    Comment


    • #3
      Re: Dboys PDW upgrades

      Originally posted by screwdriver View Post
      mine was fine using good quality bb,s. (excell .25) the ics bb,s are pants and cause feed issues.
      you will have to downgrade fps as mine was 390fps out the box on a .20
      What spring would you advise so she is firing at about 330fps?
      sigpic
      http://www.zeroin.co.uk/itrader.php?u=6155

      Comment


      • #4
        Re: Dboys PDW upgrades

        A motor upgrade seems to be fairly popular as well
        Originally posted by Nun-Chuck
        I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
        Originally posted by deanfirst
        why not use zeroone's escort service?

        Comment


        • #5
          Re: Dboys PDW upgrades

          hey

          do you guys know the best drop in motor for this gun, i have heard some people say some short motors and medium motors don't fit.

          Comment


          • #6
            Re: Dboys PDW upgrades

            Originally posted by Modizlw View Post
            hey

            do you guys know the best drop in motor for this gun, i have heard some people say some short motors and medium motors don't fit.
            Good question
            sigpic
            http://www.zeroin.co.uk/itrader.php?u=6155

            Comment


            • #7
              Re: Dboys PDW upgrades

              i fitted a m100 in mine which gave 340fps max, motor wise im standard running a 11.1v lipo for over a year.
              even with a 7.4v lipo my rate of fire is good.
              m14/l1a1/thompson/sten/sig552/kac pdw/svd/l85a2/mp40/m16vn/car15/type56/mac10/scorpion/m79/m1 carbine/m60vn/stoner63/vfc bar/xm177e2/grease gun/ar57/m1911/uzi/aksu/mp5 b&t/ppsh41/mpl/diy sog rpd/acm m500/galil/

              Comment


              • #8
                Re: Dboys PDW upgrades

                Originally posted by screwdriver View Post
                i fitted a m100 in mine which gave 340fps max, motor wise im standard running a 11.1v lipo for over a year.
                even with a 7.4v lipo my rate of fire is good.
                So if i go for two of them PEQ15 with 11.1v lipo already fitted i should be ok?
                sigpic
                http://www.zeroin.co.uk/itrader.php?u=6155

                Comment


                • #9
                  Re: Dboys PDW upgrades

                  fitting an 11.1v lipo in any gun you must be prepared to take the risk of damage .
                  if you single shot alot and you are carefull on full auto you should be fine ,i have been.
                  i use the vanaras peq 15 as a battery box on mine, origionally i used the 7.4 but the c-rating and mah rating are to low for a m100 spring.
                  the supplied peq box looks bloody awfull fitted to the gun, but you could go for the lipo conversion that fits in the ris
                  m14/l1a1/thompson/sten/sig552/kac pdw/svd/l85a2/mp40/m16vn/car15/type56/mac10/scorpion/m79/m1 carbine/m60vn/stoner63/vfc bar/xm177e2/grease gun/ar57/m1911/uzi/aksu/mp5 b&t/ppsh41/mpl/diy sog rpd/acm m500/galil/

                  Comment


                  • #10
                    Re: Dboys PDW upgrades

                    Originally posted by screwdriver View Post
                    fitting an 11.1v lipo in any gun you must be prepared to take the risk of damage .
                    if you single shot alot and you are carefull on full auto you should be fine ,i have been.
                    i use the vanaras peq 15 as a battery box on mine, origionally i used the 7.4 but the c-rating and mah rating are to low for a m100 spring.
                    the supplied peq box looks bloody awfull fitted to the gun, but you could go for the lipo conversion that fits in the ris
                    I had thought of the lipo conversion but at £100 its a little to steep for my pocket.
                    sigpic
                    http://www.zeroin.co.uk/itrader.php?u=6155

                    Comment


                    • #11
                      Re: Dboys PDW upgrades

                      My brother use's a shortstroked dboys pdw.
                      we only shortstroked it due to its heavy use at cqb.
                      but a peq15 lipo is the way forward. small enough not to ruin the look of the gun.
                      plus there cheap enough for a couple for biger games.

                      Comment

                      About the Author

                      Collapse

                      knarf3 Find out more about knarf3
                      Working...
                      X