AEG not shooting, trigger contacts

[GrammarNazi75]

As it says above my AEG is not shooting. I believed it to be the wiring as there were a couple of live wires, but as i cut them off and put a new tamiya connector on i suspect it is now the trigger contacts.

just before it stopped firing it had a burning sort of smell, but i don't know what the contacts would look like if they do need replacing or just cleaning.

If the contacts were burned would it just stop firing or maybe the 'over the top' amount of grease chinese manufacturers put in their guns cause the contact to be blocked?

Sorry i can't go into more detail, any help would be appreciated.

[guard-sniper87]

Re: AEG not shooting, trigger contacts

firstly , what gun is it in, and you said many wires where were these wires

do you know if the weapon has a mosfet ?

[GrammarNazi75]

Re: AEG not shooting, trigger contacts

It is an FN F2000, i got it for a project gun.

It has no MOSFET and it was the wires from the gearbox, with the fuse still intact.

[guard-sniper87]

Re: AEG not shooting, trigger contacts

is this a jls version mate

if so remove the gearbox and check the contacts as they are crap from factory,

check for arcin clean the contacts

[GrammarNazi75]

Re: AEG not shooting, trigger contacts

cheers just doing that now, also what is arcin?

[guard-sniper87]

Re: AEG not shooting, trigger contacts

check the trigger contacts mate and clean all the grime and grease from them as this will stop the gun's trigger completing the electrical circuit