Famas dissemble

[ElZer0]

How do you get the gear box out??

I can't seem to find info anywhere.... There is a small rod from the safety stopping it coming out...

Help please

[Cerbo Knight]

Re: Famas dissemble

What version of FAMAS is it?

[ElZer0]

Re: Famas dissemble

The one ith a small trigger guard and bi pod...

[sj_asc]

Re: Famas dissemble

Heres a short guide to getting the TM FAMAS GB.
http://i4.photobucket.com/albums/y14...20Tech/FA2.jpg

Start by removing the screw from the butt cap


The Butt cap will then pull off, then pull the fuse box and wiring loom out and disconnect the small tamiyas.

http://i4.photobucket.com/albums/y14...20Tech/FA5.jpg

Now remove the two side screws (one on each side) the cheek piece will then slide up and off.




Disconnect the trigger link.



Then remove the four screws that hold the gb to the receiver, there are 2 on each side.


Loosen the sides of the receiver and slide the mechbox out.

[Cerbo Knight]

Re: Famas dissemble

Well I meant to ask what make, but sniperjesus did a better job than I could :D

[ElZer0]

Re: Famas dissemble

thats excellent!!

but id worked it out by then... lol