m4 fire selector problem

[Jackajeeb]

hi

used my m4 last weekend and for some unknown reason the fire selector fell off :S

tried to re attach by simply screwing back on but when placed back on it simply swings about.

is there a special way to re attach the fire selector so it operates properly?

[Apurturesci]

Re: m4 fire selector problem

You have left the tiny ball bearing out.

[Jackajeeb]

Re: m4 fire selector problem

Thanks for the solution, but if i could not find this ball bearing, is there anywhere to get spares?

[Apurturesci]

Re: m4 fire selector problem

Have you got the small spring?

[Jackajeeb]

Re: m4 fire selector problem

small spring? :s

[Apurturesci]

Re: m4 fire selector problem

How the selector works:



The selector has small hole in side it. A small spring, and a ball bearing, or a small bit of plastic sit on that. Then , when you go to click it into place, the ball bearing ect. is pushed into a dip in the receiver to click it into place.

[Jackajeeb]

Re: m4 fire selector problem

dont have either of those parts as they came off while playing, anywhere i could source them from? or should i just get i fixed when i have the gun upgraded in a week?

[Apurturesci]

Re: m4 fire selector problem

Well you can get a fire selector with those bits from any airsoft shop for around a tenner, otherwise do as you suggested.

[Jackajeeb]

Re: m4 fire selector problem

ill probably get it fixed with the upgrade, less effort. Thanks for your help.