Change M15a4 Body, How To continue

[Callirye]

I have changed all the stuff in the lower body, but not sure how to do the upper part.

Can't see a way of unscrewing any of it.

Here is a picture of where I am:



Thanks,

Callirye.

[jagillham]

Re: Change M15a4 Body, How To continue

Small screw in mag release catch. You'll also want to pull the stock off the end, and poke a screw driver down the stock tube!

[jagillham]

Re: Change M15a4 Body, How To continue

Oh no, my bad - other way around.

Take it you have defence to be manufacturing a RIF from that two tone?!

[Callirye]

Re: Change M15a4 Body, How To continue

it's legal with ukara isnt it..?

+ I want top body not lower.

[jagillham]

Re: Change M15a4 Body, How To continue

So long as you 18+ and a "regular" then it's legal. UKARA is a shop thing!

I assume you want to take the outer barrel off! The whole thing should unscrew I think.

[Callirye]

Re: Change M15a4 Body, How To continue

I'm 18 and have been a few times. Anyways, Can't see how :S

[The Keeper of Secrets]

Re: Change M15a4 Body, How To continue

Push back and twist the handguard securing ring until is springs off the delta ring. The unscrew the delta ring while slowly sliding the outer barrel off.