Piston teeth removal

[mirlock]

Based on a m4 sopmod ive been reading a japanese site and they say take off the 2nd tooth from the piston to avoid crash.

I notice on the sopmod piston it has the 2nd tooth shaved a little.

What do you guys think

Pics of shaved & Removed

[Montesa77]

Re: Piston teeth removal

To stop pre-enagement and to ease the AoE correction. Most people do it, I take off the said tooth and however much I can off the next one(normaly half).

[mirlock]

Re: Piston teeth removal

To stop pre-enagement and to ease the AoE correction. Most people do it, I take off the said tooth and however much I can off the next one(normaly half).

Thanks matey for reply . ill cut mine off then see how it runs

[Montesa77]

Re: Piston teeth removal

Will run no different unless the AoE is corrected, your piston will just last longer.

[richardy]

Re: Piston teeth removal

i like to lower it as in the first pic, if you look at where the teeth go when you simiulate it, it doesnt catch any more than the very top.

The way i figure pistons do a good enough job of removing there teeth on there own, know need to do all the work for them

[mirlock]

Re: Piston teeth removal

Ok nice one rich ill have a fiddle and see whats what. gun best be good after ive done all this work.