Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

A&K 249 hop rubber replacement

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    A&K 249 hop rubber replacement

    Ive done the hop nub biro mod and have awesome range, but the gun seems to be feeding loads of bbs into the barrel when not firing, then when i fire, a few fall out the end before it starts firing again.
    Ive tried turning hop all the way off and it doesnt make a difference.
    My question is, the Hop rubber i took out doesnt have a skirt? on it? The bit that i think holds the bbs?
    Is that right?
    If not, can i replace with any hop rubber?

    Hoping to use gun tomorrow

    Originally posted by Metalbody
    pulling one off certainly feels good
    Tags: 249 hop
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: A&K 249 hop rubber replacement

    like this?


    Originally posted by Metalbody
    pulling one off certainly feels good
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: A&K 249 hop rubber replacement

      Just trying to fit a madbull rubber, have i pushed the barrel into the hop unit too far as it wont feed like this


      Originally posted by Metalbody
      pulling one off certainly feels good
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: A&K 249 hop rubber replacement

        bump

        Originally posted by Metalbody
        pulling one off certainly feels good
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        private parts Find out more about private parts
        Working...
        X