G&P M4 Moe got a lil problem.

[revell55]

Hey there I haz a little problem, Normaly with front wired guns there are small connectors on the wire to unplug so that you can take the upper receiver of without having to cut the wires yeh?, well I just opened up my G&P m4 moe, and found that mine has no connecters, and I was wandering if anyone knows a special way g&p has made it, and if so how to get the upper and lower seperated without have to cut the wired and resolder?

[johnnyj]

Re: G&P M4 Moe got a lil problem.

very odd if its front wired it should have small connector's that fit the gap under the barrel .

is it small tam or deans ?

[revell55]

Re: G&P M4 Moe got a lil problem.

small tam, but they still dont fit though gap, and dont realy want to force it.

[gundown]

Re: G&P M4 Moe got a lil problem.

i now on my gun that there was connector but both where under one piece of heat shrink and that had to be rip apart.

[johnnyj]

Re: G&P M4 Moe got a lil problem.

if there is no small spade connections hidden , take the small tam apart it might just fit

[revell55]

Re: G&P M4 Moe got a lil problem.

ok, i'll have ago, i'll be back in a few with progress report

[revell55]

Re: G&P M4 Moe got a lil problem.

still dosent seem to beable to fit though, I guess i'll just have to cut and resolder ):