lock to semi

[Crude Skinny B]

hello, what different ways are there to lock a gun to semi and what is the best way to do it, preferably without a mosfet.
thanks

[johnnyj]

Re: lock to semi

type of gun ?

[Crude Skinny B]

Re: lock to semi

well an aeg for a v2 gearbox
g36,m4 mp5 what ever really

[richardy]

Re: lock to semi

cut the selector plate

[Crude Skinny B]

Re: lock to semi

where abouts?

[ajn]

Re: lock to semi

Best way I have heard is to drill a very small shallow hole in the gearbox shell at the right of the selector switch when in the semi position and put a small grub screw in it so the selector can't move past there.

[guard-sniper87]

Re: lock to semi

or just cut the selector plate on the slide rail so that the plate doesnt go into the full auto as richardy says

[private parts]

Re: lock to semi

But without a mosfet its going to keep locking up isnt it?

[Tiercel]

Re: lock to semi

Personally Id go for the grub screw option... whilst it doesnt happen often, it can/does happen, youre tapping away on single shot, then CLUNK something locks up and you need to flick it to auto to clear it. If you cut the selector plate, youre gonna have to take the whole gun apart to clear it, if you use a little screw, just unscrew it, few shots on auto and youre back in business.

[guard-sniper87]

Re: lock to semi

id put the screw on the reciever not the gearbox......

then is very easy to remove if in a jam

giving the marshall the tool to undo the screw so cant flick over on full.